Ht-instruments HT5000 Bedienungsanleitung PDF herunterladen (Seite 15)

HT-5000

EN - 14

4.2.3 Initial use of the transmitter TX5000

Follow the steps listed below in order to prepare the transmitter to search for lines in

conjunction with the receiver:

Step Action

Connect the transmitter to the line to be located using the most

suitable method, or place the transmitter on the site to be searched

see paragraph 4.2.2

Press

to switch on the transmitter

Select the desired output signal using the and function keys

(see paragraph 4.1.3)

A green LED indicates that the respective setting is active

Select the desired mode of operation using the button (see

paragraph 4.1.3)

Result:

In Direct mode, an LED next to the

symbol indicates how

good the connection is to the connected line:

• Green blinking: good (low-resistance) connection

• Alternating red and green: sufficient connection

• Red blinking: poor/no (high-resistance) connection

As described in paragraph 4.3.1 use the RX5000 to locate metallic

conductors

M P

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 30 31

Keine Kommentare

Ht-instruments HT5000 Bedienungsanleitung Seite 15